The Main Points When Cement Nail And Wall Nailing

2022-06-14

Today, I will introduce to you the use of cement nails to fix the wall firmly. When attaching the wall to the wall, the main points of the wall cloth construction are:

  1. Clean the walls and stickers before sticking them to make them smooth and prevent moisture-proof paint, and apply evenly and not too thickly.
  2. If there are cracks on the strong surface, or uneven ground, you should smooth her with something. If there are burrs on the wall, you should smooth it.
  3. In order to prevent the stickers from falling, generally apply a layer of moisture-proof paint on the wall.
  4. According to the construction site, there are generally vertical lines and horizontal lines, which we can use at this time.
  5. After attaching it, you should give the air bubbles on the sticker to Yaping. There should be no air bubbles. The extruded glue should be cleaned in time.

drywall screw

Related Product

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]


  • Previous: Technical Composition Of Concrete Nail
  • Next:Common Nail Wholesale to pay attention to what?

  • error: Content is protected !!