dimensons for 6 d common nail


A 6 inch common nail is employed for connecting or binding two substances such as timber. The ‘d’ in 6d stands for the length of the nail, being 6 inches, while ‘common’ symbolizes the kind of head – it has a broad flat surface. Compare this to other varieties of nails such as the finishing nail which has a smaller head.

For anyone looking to purchase nails, it’s essential to understand the “penny size” measurement system. The “d” is abbreviated from “penny” and refers to the traditional English currency; thus, a 6d nail is 6 pennies in length. This is the second largest size, with 16d being the biggest and 2d being the smallest.

When a 6d common nail is properly employed, the length of the nail can significantly influence the amount of holding power it exhibits. With longer 6d nails, an increased level of support is made available for framing projects, enabling heavier pieces of wood to remain united.

Uncovering the perfect size for a 6d common nail is of great importance. Should the nail be too thin, it will lack an adequate grip; yet if it is too thick, then the task of inserting it into wood becomes an arduous undertaking. Therefore, striking the optimal balance between these two factors is essential.

Though there are some variations in size, 0.162 inches is the default diameter for a typical 6d common nail. This is the nail size most individuals use, and it has become a standardized dimension.

Nailing into wood can be a tricky job, and the type of nail you choose can affect how smoothly it goes. Among the multiple 6d common nails found on the market, plain shank nails are the most frequently used. These nails have smooth shafts without any ridges or grooves, giving them an advantage when it comes to driving them in–in addition to providing added holding power.

Introducing the ring shank nail: a 6d common nail with a distinctive feature. Along the circumference of its shaft are ridges that amplify its gripping power, although it does take a bit more effort to push it into wood.

The ultimate 6d common nail is the spiral-shaped screw shank that boasts threading along its full length, granting it far greater holding force than standard nails in wood.

When selecting the appropriate nail for a project, it is essential to take the intended application into account. If you are embarking on a project requiring heavy-duty support, such as a frame, then picking a plain shank or screw shank nail is a sound decision. However, if it is something more delicate that does not need intensive holding power, like trimming, a ring shank nail should be the go to option.

For any project involving 6d common nails, the size of the nail is a critical factor. The length and diameter contribute to how well the nail will hold, so take great care to select the most suitable size for your specific requirements.

Related Product

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Previous: common nails are used for
  • Next:common nail gun

  • error: Content is protected !!