common nail size table

2023-06-20

The size of a nail is determined by the diameter of its shank, which extends from the tip to the head. In America, nails are mainly available ranging from 1.6-2.1 millimeters or 0.063–0.083 inches. Meanwhile, across Europe, nails come in diameters of 2–4 millimeters (or 2.5–3.5 millimeters).

Find below a comprehensive list of the most usually seen nail dimensions.

Dimensions of an average Nail, Measured Both in Inches and Millimetres

The sizes of nails most frequently encountered in European settings are provided in the table that follows.

Millimeter Measurements of Nail Sizes Transformed to Inches

The dimensions of nails vary according to the corresponding regions. In the United States, the most prevalent sizes are 0.063 inches (1.6 mm), 0.067 inches (1.7 mm), 0.072 inches (1.8 mm), and 0.083 inches (2.1 mm). On the other hand, the Europeans tend to favor diameters of 2 mm, 2.5 mm, 3 mm, 3.5 mm, and 4 mm when it comes to nails.

A nail’s size can be measured by both inches and millimeters. As noted in the chart below, the most frequently used sizes range from a small diameter of 0.079 inches or 2.00 millimeters, all the way up to a large diameter of 0.328 inches or 8.3 millimeters.

Equivalent diameters of nails (in inches) are easily determined when looking at the relation to their respective sizes (in inches and millimetres). For instance, a nail size of 3 inches would equate to a 3 mm nail size, with the equivalent diameter being 0.1205 inches.

Article Heading: Exploring Numbers from 0.063 to 0.2 Starting off with 0.063, the next step is 1.6, followed by 0.067 and 1.7 consecutively. Continuing onward to 0.072 we reach 1.8 before zooming ahead to 0.083 where 2.1 can be found waiting on the other side. A bit further down the line, the number 0.094 leads us up-close with 2.4, and as we advance to 0.109, just around the corner awaits 2.8 to greet us. Following that, it’s onward to 0.125 which shows us 3.2 before arriving at 0.138 and 3.5 back-to-back. With one more leap at 0.148, 3.8 is now in sight and at last we settle at the conclusion of our journey with 0.165 unearthing 4.2, 0.177 discovering 4.5, 0.191 unveiling 4.8 before making it all the way to our destination of 0.2 and 5 in synchronicity!

From Rome to Reykjavik, the length and girth of nails used across Europe can be measured in both inches and millimeters, as outlined in the chart below. Here, you can see the most commonly used nail sizes and their respective diameters.

When it comes to putting things together, the nail size plays a crucial role. In millimeters, the sizes range from 0 to 25 mm. In inches, these numbers translate from 0.00 to 0.98. Conversion brings the equivalent diameters from 0 to 0.039 inches, respectively.

Exploring the Relationship between 0.079 and 0.392: Two Important Values 2 0.079 0.079 2.5 0.098 0.098 3 0.118 0.118 3.5 0.137 0.137 4 0.157 0.157 4.5 0.177 0.177 5 0.197 0.197 5.5 0.216 0.216 6 0.236 0.236 6.5 0.255 0.255 7 0.275 0.275 7.5 0.294 0.294 8
0

314 0

314 8

5

0

333

0 333 9
0 353
0 353 9
5
0 372
0 372 10
0 392
0 392 10
5 411
0 431
0 431 11
5 450
0 450 Examining the connection between two values of paramount importance, this article delves into a thorough analysis of the correlation between two fixed points: the numerical value of .079 to that of .392 . Beginning at the former and steadily rising in increments up to the latter, we can trace the evolution in between those two endpoints through a chain of intermediary points: .098, .118, and so on until finally arriving at our destination at .450 at point 11

With a value of twelve, the magnitude of this figure speaks volumes. It is quite remarkable to see how .470 reinforces the magnitude undeniably so.

Related Product

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]


  • Previous: how to nail a concrete wall
  • Next:how to shoot nails into concrete

  • error: Content is protected !!