linyi common nail


The construction industry’s top choice for fastening materials, Common Nails from Linyi, China – where they were first manufactured – are undisputedly one of the most multi-functional nails available today. Created out of high-grade iron or steel, they feature a round or flat head and a smooth shank – designed to effortlessly penetrate wood upon application.

Shopkeepers might carry many sizes of nails, but the most widely distributed is the 3.5 inch (8.89 cm) variant. Calculating the size of these spikes involves measuring from the tip to the top of the head alongside taking a reading of the width along the mid-section of the nail.

Common nails are one of the most familiar fasteners for joining wood and attaching other materials like plasterboard. Whether applied indoors or out, they are a dependable choice.

When hammering common nails into wood, take great caution to ensure they are installed correctly. If driven in too deeply, the wood may suffer a nasty split. Instead, drive the nails with precision until their heads are level with the wood’s surface.

Two coatings can be found for common nails- galvanized and uncoated finishes. The former is shielded against oxidation and corrosion thanks to the zinc layer applied to its surface, whereas the latter will gradually succumb to rust in the presence of moisture.

Common nails come in a range of sizes and finishes, making them ideal for any project. From a brand-new deck to fixing a loose board, they provide an economical and effective solution.

Related Product

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Previous: nail salon loughborough commons
  • Next:solar nails westchester commons hours

  • error: Content is protected !!