how to remove ramset nails from concrete


If your mission is to extract ramset nails from concrete, there are a few key points to consider. Initially, you’ll want to equip yourself with the right tools for the job; a hammer and chisel will serve your purpose, while a power drill and robust wire cutters may be necessary. Secondly, proceed with caution as you chip away at the concrete to avoid cracking or chiseling out large holes. Lastly, safety should come above all else. Remember to wear protective gloves and eyewear when interacting with tools.

Before you can get started, you’ll need to locate the ramset nails. Oftentimes they are tucked away in the concrete near the edges of a door or window frame. Utilize your chisel to draw a line encircling each nail to avoid any potential slipping of the tool while executing the tasks.

With a tap of the hammer, the chisel will be set into motion. Make sure to go easy – no one wants a damaged concrete floor! Rotate the chisel around the nails until they uncontrollably shoot out from the pressure. In the unlucky event that the nails are being overly stubborn, turn to your trusty power drill to get those pesky buggers out!

Using wire cutters, delicately snip off the nails that have been embedded in the concrete, taking caution not to harm yourself on the razor-sharp metal edges. Once all of the nails have been cut away, collect any dust or debris that may be present and dispose of it correctly.

With only a small measure of forbearance and the right circumstances, relieving ramset nails from concrete is not farfetched. Simply ensure that you pursue adequate safety precautions and move gradually to evade worsening the cement. And there you have it – easy as pie!

Related Product

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Previous: aerosmith concrete nail gun
  • Next:common causes of nail diseases

  • error: Content is protected !!