concrete brad nails

2023-06-10

Fastening wood to concrete has never been easier than with concrete brad nails- designed for maximum impact with their pointed tip. Coming in a spectrum of sizes, the most popular being 3/8 inch, these tough nails make the seemingly impossible process of attaching wood to concrete a breeze.

Steel and stainless steel are the two materials commonly used to make concrete brad nails. Steel nails, while the cheaper of the two, tend to be less sturdy and may succumb to rust eventually. Stainless steel nails, on the other hand, are a pricier investment upfront but stand up much better in terms of strength and longevity—they won’t even be affected by corrosion.

Before reaching for a concrete brad nail, stop and contemplate the thickness of the wood. Too thick, and the nail won’t plunge in far enough to ensure a firm hold. Too thin, and it runs the risk of fracturing the wood. Careful selection is key!

To affix a concrete brad nail, it is important to commence by drilling a pilot hole into the concrete. The circumference of the opening should be appropriate for the nail’s measurement. Afterwards, insert the nail into the cavity and gently tap it with a hammer till the surface of the concrete is even with it. Lastly, use a nail gun to drive the nail into the wood.

Concrete brad nails provide a secure and reliable way to fasten wood to concrete. These nails are remarkably sturdy, and their uncommon strength makes them suitable for various types of projects.

Related Product

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]


  • Previous: nail salon tikahtnu commons
  • Next:nail salon in mohawk commons

  • error: Content is protected !!