common nail vs galvanized box nail


Knowing which nails to employ in a construction job is an important decision that must be taken with caution. The common nail and galvanized box nail are two of the more prevalent nails used in this sector, each with its own distinct characteristics. Examining these nuances and understanding their nuances is fundamental for guaranteeing the right selection of material.

The ubiquitous common nail is an essential ingredient for many woodworking projects. Usually composed of a low-carbon steel alloy, these nails come in a range of lengths, starting at 3/4″ and stretching up to 3″. A common choice for framing or carpentry tasks, these nails gently drive into softer materials with minimal effort. Whether your slight at hand involves treated lumber or softwoods, the classic common nail will provide reliable fastening power.

A galvanized box nail is the answer to secure construction in a range of outdoor settings. This specialized nail is composed of durable high carbon steel and is then covered in a zinc finish for extra against water, snow, and rust. Lengths go from one inch up to four for a variety of jobs, ensuring your exterior projects are safe and sound.

The main divergence between these two nail types is the specificity of the material they are composed of. Common nails are followed up with a low carbon steel, which makes them pliant and simple to insert into the materials. Whereas, Galvanized box nails are more durable due to the composition of higher-grade carbon steel. This makes them perfect for outdoor projects that must uphold immunity against corrosion.

Compared to other fasteners, it’s easy to find common nails at a budget-friendly price. With galvanized box nails, however, shoppers can expect to break the bank – they receive an extra zinc coating during production, making them more costly.

Standing up to the elements, galvanized box nails offer superior strength and protection compared to their common nail counterparts. With an extra layer of zinc coating, these nails provide abrasion defense against all kinds of weathering, rendering them an optimal choice for projects that must endure outdoor conditions.

When it comes to applications, there are two options to choose from: common nails and galvanized box nails. Common nails are cost-effective and specially designed for use indoors, while galvanized box nails provide increased protection against corrosion– making them well-suited for external projects. Although the latter may be slightly pricier in comparison, such conservation is often the wiser choice for outdoor endeavors.

When it comes to putting together two pieces of material, nails are a critical piece of the puzzle. Understanding the various kinds that exist is key to choosing the right one for your project. In this post, let’s explore the distinctions between standard common nails and galvanized box nails.

One of the oldest, most basic types of nails is the common nail. Made of soft iron alloy, these particular nails sport a flat, oval-shaped head. The shank typically showcases a slight taper to give it more secure hold in the material it’s driven into. Common nails are often called without a second thought; their nickname “clout nails” is taken from the French word Clou, meaning ‘nail’. Carpenters and framers frequently use common nails; their simplistic design allows them to join two pieces of wood together quickly and easily.

When you need a more specialized fastener, galvanized box nails are the ideal choice. They have a distinct make-up that includes a steel alloy and a zinc coating to form a protective layer around the nail. In addition to protecting against rust and corrosion, the coating also gives the nails a sliver-shining shine. Furthermore, the heads are usually glossy and rectangular, while the shanks are slim and direct. These nails come in handy when putting up roofs and siding, as they are moisture-resistant – making them adept at warding off rotting – while assisting in asphalt shingle installation and ensuring drywall and insulation effectively stays within a building’s walls.

Galvanized box nails offer superior strength when compared to common nails due to their zinc coatings and steel alloy composition. This durability allows them to better bear more substantial burdens and generate enhanced gripping force. Although these nails may cost more, they fail to provide the same attractive appearance as common nails.

Paying less for a project upfront can sometimes be appealing, and in the case of nails, common nails offer a more cost-efficient solution when compared to galvanized box nails. Although they are easier to get in hardware stores, buyers should consider whether they provide the right support for the job at hand – they do not have the same level of strength or longevity as their higher-priced counterparts.

Summing up, when it comes to choosing between common nails and galvanized box nails, there is a key distinction to be made. Common nails, more abundant and cost-effective, lack the potency of their fellow hardware staple, yet galvanized box nails – slightly more expensive due to their zinc coating – display superior resistance to rust and corrosion. Ultimately, the ultimate verdict cascades down to the very purpose of the project, as well as the desired outcome.

Related Product

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Previous: length of 10d common nails
  • Next:common nail gun jammed

  • error: Content is protected !!