common gun nail sizes


From vast framing nails to edgy roofing nails, there are an array of gun nails for various projects. The three most widely used sizes are 16d, 10d, and 8d. The 16d type is the largest and can be found in practically any lumber store. 10d are best suited for finishing work, while 8d usually shines when it comes to roofing assignments.

Finding the right nail for your project requires taking into account its material thickness. When hammering into a thicker plank of wood, use a bigger nail to keep it locked in place; whereas a slimmer piece of wood needs a smaller nail to remain secure.

When searching for the perfect nail, one of the factors to take into account is the length. Guns nails are available in various lengths, depending on the depth of the surface being nailed into. For instance, it would be wise to choose a lengthier nail if you were nailing something deep like a large piece of wood.

When selecting the correct gun nail for your project, two distinct types become apparent: those featuring a rounded top, and those with a flat top. The shape of the gun nail you choose should be tailored to the type of task at hand. Round-headed ones may suit lighter operations, while those with a flat top may be better suited for bigger projects. Ultimately, the decision is yours.

When looking for the perfect nail to complete your project, there are three essential factors to think about. Size, length, and type of the nail must all be taken into account in order to guarantee that your endeavor turns out precisely how you pictured it. Thinking ahead and selecting the most suitable nail will lead to a successful result that is sure to impress.

Related Product

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Previous: 5 inch common nails
  • Next:nail gun into concrete

  • error: Content is protected !!