8d common 0.131-inch by 2-1 2-inch nails


A box of common 8d nails hides a hundred nails inside with each nail measuring 0.131 inches in diameter and 2-1/2 inches in length. Known also as eight-penny nails, these specimens feature a round, sleek shank and are designed for hammering into wood.

With construction projects, the 8d common nail is the most frequent type of fastener utilized. One drives the nail into the material with a robust hammer strike, then, with further blows, sinks its head beneath the wood’s surface.

Nailed it! 8d common nails come in many different finishes, like galvanized, hot-dipped galvanized, and stainless steel varieties. Plus, you can select a length that works for you – they range from 1-1/2 inches all the way up to 6 inches long.

To securely fix 1/2-inch plywood to a stud, an 8d common nail is optimal, as any larger nail runs the risk of causing the plywood to split. It is imperative to select an appropriately sized nail when joining wood together, as using one that is too big or small could result in a less-than-satisfactory structure.

Hammering nails into the studs at an appropriate angle is an important component of any woodworking project. Make sure the nails are immersed in the wood so that the head is level with the surface to avoid potential tripping hazards. Any nailing done at an incline can result in a bumpy and dangerous surface.

Offering convenience and affordability, the 8d common nail is a favored choice among construction professionals. Allowing for versatility in its use, this fastener is accessible in a vast array of lengths and coatings to help create the desired outcome. Utilized correctly, the dependable 8d nail provides a secure fastening solution.

Related Product

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]

  • Previous: common nail conditions with alcohol abuse
  • Next:lee nails high pointe commons hours

  • error: Content is protected !!