22 concrete nails

2023-06-14

Nailing concrete into wood isn’t a breezy feat; the nail often goes in unevenly and sometimes the head snaps off leaving a cumbersome metal outgrowth. To dodge any of these troubles, be sure to use the appropriate type of nails for the job!

Concrete nails have been crafted with one purpose in mind: the bonding of concrete and masonry materials. To achieve this, they are wrought from hardened steel with a pointed tip designed to pierce concrete without hesitation. Additionally, the nail head is sturdier than standard, avoiding any risk of breakage.

A well-rounded head on your hammer is key when driving a concrete nail into wood; it should be small enough to not harm the nail. If the top of the nail has come off, take care to remove it without damaging the wood.

When picking the perfect size of a concrete nail, it is worth considering erring on the side of safety and opting for a larger one. Although there are plenty of options available, without the right size, you may not achieve the desired outcome.

For effective results, one must steer clear of using concrete nails on woods like pine or cedar, as these nails may not only fail to provide a secure hold, but can also tear the surface apart. Conversely, with materials like oak and maple, one can expect an assured grip and hold from concrete nails.

As you’re working with a concrete nail and a piece of wood, eye protection in the form of safety glasses is highly recommended. Your hands may also need additional protection, so wearing gloves is a smart move.

Nails can secure the wood, but to make sure they don’t stick out too far, you’ll need a file or saw to trim off any extra. Ensure you wear gloves when undertaking this task as the metal is quite sharp and could result in an injury.

When you need to drive concrete nails into wood, a power drill can make quick work of the task. With this method, you can finish faster and be sure that the nails are secure by selecting the proper type of drill bit. This will prevent harm to the wood and make the task a breeze.

Utilizing concrete nails to affix wood to concrete is an effective approach, provided the nails are the right size for the job. To ensure optimal safety for yourself, remember to put on gloves and safety glasses before hammering the nails into place.

Related Product

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]


  • Previous: nail in anchors concrete
  • Next:2 concrete nails

  • error: Content is protected !!