21 degree structural connection nails plastic strip


For fastening wood or metal to concrete, structural connection nails are essential. The nails come with a plastic strip to keep it in the right place as it is being hammered. Each nail also has a washer, which guarantees that it won’t be removed from the concrete once secured.

Varied lengths of nails are created specifically for use with various wood or metal materials; the most commonly used size is 21 degrees.

Before you can begin attaching the nail securely, you have to predrill a hole that is slightly less than the diameter of the nail in the designated wood or metal surface. Then follow up by creating a similar-sized hole in the concrete.

Pound the nail firmly into the wooden or metallic surface and make sure that the plastic guard is pointing towards the concrete. Push it steadily into the concrete and then affix the washer at the end of it; this will prevent the nail from dislodging.

From 3/16” to 3/8”, the offered range of nail diameters caters to diverse lumber and metal thicknesses, enabling you to source a nail size that perfectly matches your requirements.

Steel in the form of nails can be found in several distinctive varieties. Two of the most common types are galvanized and stainless steel.

A vast array of nail measurements can be found to suit diverse thicknesses of either wood or metal, with the most habitual options ranging from 1-1/2”, 2”, 2-1/2”, 3”, and 4”.

The utilization of a hammer and punch is necessary for disengaging the nails from the lumber or metal. Following this, a chisel can be employed to release the nail from the cement.

An array of nail lengths can be accessed to suit the magnitude of the wood or metal requiring fixation. Commonly used measurements include 3/16”, 1/4”, 5/16”, and 3/8”.

Numerous finish options exist for nails, with galvanized and stainless steel being the two most popular.

Related Product

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Previous: air gun concrete nailer
  • Next:common disorders of the nails

  • error: Content is protected !!