removing nails from concrete


When it comes to saying goodbye to nails embedded in concrete, there are numerous options available. Popular choices include a hammer and chisel, but for those eager to get the job done quickly, power tools can also do the trick. However, whichever method you choose, take caution not to cause irreparable harm to the concrete.

When attempting to remove a nail using a hammer and chisel, the first step is to position the chisel at an upwards slant on the nail head. Then, drive the device downwards by striking it with the hammer. This should cause the nail to become loose and easy to extract with your fingertips. In case of more stubborn nails, a pry bar may be needed in order to assist with forced extraction.

To begin utilizing a power tool, make certain that a metal cutting blade is fitted. Don’t forget to wear safety goggles for further protection and to ensure that there are no accidents. After settling into a safe and comfortable position, start the tool and carefully guide it across the nail. The metal cutting blade will quickly slice through the head of the nail, facilitating its successful removal.

Once the nail is taken out, it’s time to mend the gap that remains. First, consider crushing up any chunks of concrete in the area and then fill it with fresh concrete for a seamless repair.

Related Product

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Previous: liquid nails concrete and mortar repair lowes
  • Next:14 ga concrete t nails

  • error: Content is protected !!