hammer nail into concrete wall


When attempting to sink a nail into a concrete wall, there are several aspects to consider. The kind of hammer should be foremost in mind; a claw hammer is preferred due to its weight, which can drive the nail into the concrete. Secondly, it is easier to work with a sufficiently large nail, so be sure to take size into account when selecting one.

With tool in hand, it’s time to begin. Grip the nail firmly on the designated spot. Take the hammer and give a strong tap to the nail with the flat side of the metal head, driving it into the concrete. Keep pounding on clasping the spike until its entirety is inside the surface. Swing away but be mindful to not have too much force as you might end up disconnecting the top of the nail from its body.

With the nail fully in place, a period of endurance begins. Depending on the bulk of the wall, this wait can range from several hours to several days as the concrete requires sufficient time to dry and harden. Eventually, when all has settled, the time for action arrives – using a gentle rocking motion, the nail can be easily loosened and removed.

When it comes to using a hammer to attach something to a concrete wall, the key is to ensure that all the essential elements are coming together. Gather the necessary supplies, and make sure to use patience and precision while sinking the nail. By taking your time, it’s possible to fix anything you’d like right onto the concrete barriers.

Related Product

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Previous: finishing nail vs common nail
  • Next:wood to concrete nail gun

  • error: Content is protected !!