expanding concrete nails

2023-06-14

For DIY-ers looking to join wood and concrete, there is no better choice than to go for expanding concrete nails. A popular and simple option, they are conveniently for sale in multiple lengths and diameters at most hardware stores.

Concrete nails designed for expansion become secured as a result of being inserted into concrete. The size of the head of the nail is marginally broader than the shaft, and as it is distributed deeply into the concrete, the head opens outwards, fastening the nail in its spot.

Using expanding concrete nails begins with prepping the concrete for them. Using a hammer drill in combination with the appropriate bit for your specific nail size, make a hole in the concrete slightly smaller than the nail’s shaft.

With safety in mind, cover your eyes with protective gear and take a hammer in hand. Then, carefully place the nail into the formed hole and firmly tap it until the top of the nail evens out with the concrete.

With the nail inserted into its desired location, the commencement of expansion will initiate. Gradually, the head of the nail will spread in all directions, securing the nail to its initial spot. The amount of time taken for the enlargement could range from an instant to multiple minutes, depending on the size of the nail.

After the enlargement sequence has been finished, the nail is firmly rooted in its position, all set to provide steadiness and strength to what is being fastened on the concrete.

Installing expanding concrete nails is an easy and secure way to affix wood to concrete. To ensure the best results, make sure you protect your eyes and have the right drill bit for the job. This simple tool comes in several sizes, making it a great choice for any project.

Related Product

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • Drywall Screw

    Drywall Screw

    Product Information:   Product Name Screws Drywall Nail Material Carbon steel C1022a Color Black,Galvanized Standard ISO,GB,DIN,JIS,ANSI,BSW Diameter M3.5-M6.3, 6#-14# Length […]


  • Previous: most common degrees nails
  • Next:custom common nail exporters

  • error: Content is protected !!