2d common nails

2023-06-14

With a slight curve to its head, the 2d common nail is a thin and diminutive hardware piece used to stitch together materials such as wood. This type of nail is usually fashioned from wrought iron or steel and comes in a variety of widths and lengths.

With a long history of use, fastening materials together with nails is a widespread practice. By pounding the nail into the material one desires to join, a reliable securement of two pieces can be achieved. Fastening objects to walls and other surfaces is also easily accomplished with the use of nails.

A variety of sizes and lengths of common nails exist, ranging from a minuscule of 0.12 inches in diameter, to a bolder 6-inch length. However, the most frequently used amongst them measure in at 2-1/2 inches in length.

Numerous enterprises require the use of common nails- from affixing wood adornments such as baseboards and trim to sanctioning plywood and other sheet materials, and even securing wood to concrete. Metal components may also be sturdily attached to wood by using common nails.

You’re looking to use common nails, so before you commence hammering, the most important thing is that you pick the nails which are of the right size and length for the task. From there, it’s simply a matter of striking them with the hammer to drive them into the wood, so that the head of the nail is perfectly level with the surface.

With a slanted approach, the nail should be hammered into the wood, ensuring that it is submerged beneath the surface. This technique, otherwise known as countersinking, allows the nail to be tucked away from view once the task is complete.

The last step in the process is to secure the nail, wherein the head is magnetically drawn to the timber’s exterior. This is accomplished by striking the nail within the wood till it virtually blurs into its surface.

Achieving excellence in any carpentry work relies strongly on selecting the right common nails, which can be done by following the detailed four-step instructions. Doing so will guarantee the success of your creation.

Related Product

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Black concrete nail

    Black concrete nail

    concrete nail with special materials, concrete nails are specialty nails compared with common iron nails. It is harder, the shank is short and thick commonly and it has excellent p […]

  • Concrete Nail

    Concrete Nail

    Product Information:   Product name CONCRETE NAIL Material: #45 or #55 Steel Size: 1/2″-6″ Type: Round head with smooth shank or groove shank Treatment: Electro galvanized, ho […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • U Sod Staple

    U Sod Staple

    Product Information:   Landscape Staples * 11 GAUGE STEEL CONSTRUCTION: The points on the staples are sharp enough to pierce commercial ground cloth, and the staples are long […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]


  • Previous: nailing tack strips into concrete
  • Next:10d common nails per pound

  • error: Content is protected !!