1 2 x 10 ga concrete nails 1 pound

2023-06-22

Construction typically relies on 1 2 x 10 ga concrete nails, the most common type of construction nails. Available in a spectrum of lengths ranging from 3-1/2 inches to 6 inches, these trusty tools are also offered with either smooth or spiral shanks, their diameters running up to 0.162 inches (symbolized as 8 gauge) from the standard 0.131 inches (symbolized as 10 gauge).

Carbon steel nails, draped in a protective layer of zinc-chromate plating, are the perfect choice to secure items to concrete. While the head of the nail is often flat, shapes like round and oval are available. Similarly, one can opt for a blunt point or one meticulously sharpened for an easier penetration into concrete.

Hammers and concrete nails are the go-to tools to secure wood, metal, or masonry to concrete or block surfaces. Just drive the nails into the material using a hammer and affix the wood or metal with screws or bolts to complete the job!

Although concrete nails are renowned for their superior strength and ability to take on a great amount of strain, they are not proof against corrosion. The zinc-chromate coating will slowly wear away exposing the steel underneath, creating a vulnerability which can result in rusting and eventual breakage of the nails.

In order to extend the lifespan of your concrete nails, it is essential that you frequently inspect them and replace them when necessary. Furthermore, for further protection from corrosion, it can be beneficial to use a sealer or primer on the concrete before hammering in the nails. Doing so safeguards them from timely deterioration and keeps them in excellent condition for longer.

Related Product

  • Garden Nail

    Garden Nail

    Product Information:   Black or yellow color plastic ground pegs are used for fix the ground cover or woven fabric or fleece on the ground. Material: Virgin PP OR PP +UV stabi […]

  • Double Head Nail

    Double Head Nail

    Product Information:   Material Q195/Q235 Surface Treatment Bright,  E.G,  H.D.G, M.G, V.C, C.C, P.C and so on Head Two Head Shank Smooth Shank Point Diamond Point Kinds of pa […]

  • Paper Strip Nail

    Paper Strip Nail

    Product Information:   Material Q195, Q235, stainless steel Surface Finish Bright, Galvanized, Hot Dipped Galvaized, Electro Galvanized, Zic Yellow, Zine Bule, MG, Dacro, etc. […]

  • G Sod Staple

    G Sod Staple

    Product Information:   Product name Sod Staple Material: Q195 /Q235 Size: 3/4X14GA, 3/4X9GA, 7/8X14GA, 1X9GA, 1-1/4X9GA, 1-1/2X9GA, 1-3/4X9GA Type: Round head with smooth shan […]

  • Common Nail

    Common Nail

    Product Information:    Common Nail Material Q195, Q235 Shank diameter 1.2mm-10mm Length 19mm-300mm Finish polish/bright, electro galvanized, hot dip galvanized Head flated he […]

  • Fence U Nail

    Fence U Nail

    Product Information: U TYPE NAIL  1.material: Q195/Q235 Low Carbon Iron Rod 2.shank: smooth shank, single barbed shank, double barbed shank and others 3.Point: side cut point or di […]

  • Shooting Nail

    Shooting Nail

    Product Information:   GAS CONCRETE PIN NAIL raw material steel#45,#60 diameter 2.6mm,2.7mm,3.0mm,3.2mm length 13mm,16mm,19mm,22mm,27mm,32mm,37mm shank smooth shank & shri […]

  • Headless Nail

    Headless Nail

    Product Information:   Cheap Lost Head Nails/ Headless Nails/ Finishing Nails Price Material Q195 or Q235 iron wire rod or according to request Size 1″ – 6″ Finish Polished or […]

  • Plastic Strip Nail

    Plastic Strip Nail

    Product Information:   Diameter/mm(±0.05mm) Length/mm(±1.5mm) 2.87 50/60/65/70/75 3.05 70/75/83/90 3.33 75/83/90 3.76 75/90/100/130 4.11 75/90/100/130 4.5 75/90/100/130 Featur […]


  • Previous: concrete hilti nails
  • Next:greeneville commons nail salon

  • error: Content is protected !!